Manufacturing process of powder coating
申佳液压
Telease Time:
2023-06-25
Coatings are prepared by mixing special resins, pigments and fillers, curing agents and other additives in a certain proportion, and then through hot extrusion, crushing and sieving. They are stable in storage at room temperature. After electrostatic spraying, friction spraying (thermosetting method) or fluidized bed dipping (thermoplastic method), they are heated and baked to melt and solidify to form a flat and bright permanent coating film to achieve decorative properties. and anti-corrosion purposes.
Coatings are prepared by mixing special resins, pigments and fillers, curing agents and other additives in a certain proportion, and then through hot extrusion, crushing and sieving. They are stable in storage at room temperature. After electrostatic spraying, friction spraying (thermosetting method) or fluidized bed dipping (thermoplastic method), they are heated and baked to melt and solidify to form a flat and bright permanent coating film to achieve decorative properties. and anti-corrosion purposes.
Related News
Huachen Environmental Protection
Mobile version
Contact: Zhou Libin
Tel: +86-18915705118 (China)
Tel: 097 281 7711 (Cambodia)
Contact: Zhou Li'e
Tel: +86-18914914988
E-mail: shuliqun886@163.com
Address: No. 28, Juxian Road, Banjing Town, Rugao City, Jiangsu Province
Copyright © 2023 Huachen Environmental Protection Technology (Jiangsu) Co., Ltd. | SEO